Bronco 2.3L EcoBoost Performance Calibration
2025-2026 BRONCO 2.3L MPC ECOBOOST PERF CAL
Features
- ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
- Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions.
- Ford Racing Parts 3 year/36k mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician.
- Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur.
- Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile)(Additional modifications required).
- ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
- Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
- Improved throttle response throughout rpm range
- Premium fuel required for maximum performance
- Ability to change axle/FDU ratio up to 5.38
- M-12655-F ProCal 4 delivery tool included
- Peak Torque = 415 lb-ft @ 3,500 rpm
Brand: Ford Racing
Manufacturer part number: M-9603-B23A
Turn14 part number: frpM-9603-B23A
Category: Programmers & Chips / Programmers & Tuners
Fitment
- Ford Racing 2025 Ford Bronco 2.3L EcoBoost Performance Calibration
- 2025-2026 BRONCO 2.3L MPC ECOBOOST PERF CAL
Always verify fitment for your exact year, make, model, and engine before ordering.
Emissions notice: This part may not be CARB-approved for use on emissions-controlled vehicles in California or other states that adopt CARB rules, unless it has an applicable Executive Order. EPA / emissions status from the supplier: Compliant.
Bronco 2.3L EcoBoost Performance Calibration
2025-2026 BRONCO 2.3L MPC ECOBOOST PERF CAL
Features
- ProCal 4 tool receives periodic firmware updates for greater usability and additional features. Please connect tool to PC periodically to receive the updates automatically.
- Calibration and ProCal 4 tool are VIN locked to a single vehicle and are not transferrable. Please contact the Tech Line with additional questions.
- Ford Racing Parts 3 year/36k mile warranty from new vehicle in-service date when installed by a Ford dealer or ASE/Red Seal certified technician.
- Reverting to stock calibration with non-production tires/gears will result in error codes. Loss of functionality of critical systems may occur.
- Ability to change tire size up to BFG 37x12.5R17 KO2 size (579 revolutions per mile)(Additional modifications required).
- ProCal 4 software only available for Windows 7 or greater. Will NOT work with Windows 10 in "S Mode".
- Enables upgrade of M190 to M210 front drive unit by reconfiguring DLCM module
- Improved throttle response throughout rpm range
- Premium fuel required for maximum performance
- Ability to change axle/FDU ratio up to 5.38
- M-12655-F ProCal 4 delivery tool included
- Peak Torque = 415 lb-ft @ 3,500 rpm
Brand: Ford Racing
Manufacturer part number: M-9603-B23A
Turn14 part number: frpM-9603-B23A
Category: Programmers & Chips / Programmers & Tuners
Fitment
- Ford Racing 2025 Ford Bronco 2.3L EcoBoost Performance Calibration
- 2025-2026 BRONCO 2.3L MPC ECOBOOST PERF CAL
Always verify fitment for your exact year, make, model, and engine before ordering.
Emissions notice: This part may not be CARB-approved for use on emissions-controlled vehicles in California or other states that adopt CARB rules, unless it has an applicable Executive Order. EPA / emissions status from the supplier: Compliant.
